Quick overview

The short version

  • Fasten the jeans, lay them flat, and measure in inches with the fabric relaxed.
  • Record waistband width across one side and inseam from the crotch seam to the bottom hem.
  • Keep the printed tag size and the measurements of the actual pair visible to the buyer.

Lay the jeans flat and find three landmarks

Empty the pockets, close the fly, and fasten the top button. Lay the jeans on a firm surface. Smooth the folds with your hand and let stretch denim rest before measuring. Find the top of the waistband, the intersection of the leg seams at the crotch, and the finished bottom hem. Those three landmarks answer most buyer questions.

Use the inch side of a flexible tape throughout. If you’re photographing a reading, keep the zero end and the point you are measuring to visible in the shot. A close-up of “30” alone leaves the buyer guessing where the measurement started.

Take the measurements buyers can repeat

MeasurementWhere to put the tapeExample reading
Waist widthAlign the waistband edges and measure straight across the top, with the jeans relaxed.16.5 inches flat
Front riseFollow the front center seam from the crotch intersection to the top of the waistband, including the band.11 inches
InseamStart at the crotch intersection and follow the inside seam down one leg to the finished hem.30 inches
Leg openingLay one cuff flat and measure straight across its bottom edge.7.5 inches flat

Front rise and inseam meet at the same point but run in opposite directions. If you have a surprisingly long inseam reading, check that you didn’t start at the waistband. For a buyer asking whether jeans will fit over boots, give the leg opening and say you measured across one cuff.

Write the tag size and actual length together

For the example above, you could write “Tag reads W32 L32. Waist measures 16.5 inches across laid flat. Front rise 11 inches, measured inseam 30 inches, leg opening 7.5 inches across. Measurements taken with denim relaxed.”

Check both hems when a tag says 32 and you measure 30. A shorter inseam alone doesn’t tell you whether the jeans were hemmed or shrank. If you can see a replacement hem, describe and photograph it. Keep the tag size recognizable in the listing and label the measured inseam explicitly. A buyer can compare the same seam on a pair they already own. eBay explains how size and other item specifics help buyers filter listings in its US Seller Center guide.

Carry the numbers into your Android draft

Photograph the full pair, size tag, hems, and any wear. Add your four readings as a seller note in Listalong Snap, then compare the generated description with the tape photos before posting. When you start the next pair, clear the measurements from the previous note. Two pairs with the same tag can have different inseams.

Frequently asked questions

Common questions

Do I double the waist measurement when listing jeans?

If you measure 16.5 inches straight across the flat waistband, write 16.5 inches across. You can also give about 33 inches around by doubling that width. Label each number so the buyer knows which method you used.

What if the two pant legs measure differently?

Smooth the fabric and measure each leg again from the same seam intersection. If the difference remains, report both inseams and photograph the hems.